TERMS & CONDITIONS OF SALE

  1. Price quotes provided by ITS are honored for 30 days unless sold in the interim.
  2. Order Minimum is $100 per Purchase Order. A $50 line minimum also applies.
  3. Prepaid orders (credit card, wire transfer etc.) are subject to a 7 day processing limit, after which the sale may be cancelled.
  4. Material approved for return within 30 days is subject to a 25% restocking fee as well as any associated logistic fees.
  5. Returned material will not be accepted without an R.M.A. issued by ITS.
  6. If the material is to be returned, an R.M.A. must be requested within 30 days of the Invoice date.
  7. Returned material must be received at ITS within 15 calendar days from the issuance date of the RMA with all original documentation. The R.M.A. number provided must be clearly marked on the packaging which should be sufficient to protect the part from any handling or in-transit damage.
  8. Returned material from (directly or indirectly) an end-user (maintenance facilities and/or operators) must be accompanied with a statement of non-use, certifying that the part was not used and/or installed.
  9. Credit, refunds or replacement will be issued upon final acceptance and receipt of the R.M.A.
  10. Any warranty provided is honored at the discretion of the shop issuing the Airworthiness Certificate for return / release to service.
  11. Acceptance of the Invoice constitutes acceptance of the terms and conditions stated herein as well as compliance with all applicable Export Administration Regulations. Export License acquisition is the responsibility of the purchaser and, where required, shall be obtained from the Bureau of Industry and Security.

TERMS OF PAYMENT

  1. COD Purchase Orders less than $5,000 can be paid by Company check
  2. COD Purchase Orders equal to or greater than $5,000 must be paid by Certified check
  3. Wire payment for less than $1,200, for either a prepaid order or Invoice must include a $35 fee
  4. Wire payment for equal to or greater than $1,200, for either a prepaid order or Invoice does not require a fee

TeRMS & CONDITIONS OF EXCHANGE

  1. Price quotes provided for exchange by ITS are honored for 30 days unless sold in the interim.
  2. Trace for the core unit shall be equivalent to the trace for the Serviceable unit provided or meet the trace requirements specified in the signed Exchange Agreement.
  3. Core units supplied in exchange to ITS shall at minimum, be equivalent (e.g. model or part number) to the Serviceable unit provided by ITS. Where the core unit is not equivalent, ITS reserves the right to reject the unit or have the unit modified to an equivalent level, at the customer’s expense.
  4. Order Minimum is $100 per Purchase Order. $50 line minimum also applies.
  5. Prepaid orders (credit card, wire transfer etc.) are subject to a 7 day processing limit, after which the sale may be cancelled.   
  6. Material approved for return is subject to a 25% restocking fee as well as any associated logistic fees.
  7. ITS reserves the right to send returned, un-used parts out for maintenance inspection and issuance of a fresh Airworthiness Release Certificate, at the customer’s expense.
  8. Returned material will not be accepted without an R.M.A. issued by ITS.
  9. If the material is to be returned, an R.M.A. must be requested within 30 days of the Invoice date.
  10. Returned material must be received at ITS within 15 days from the issuance date of the RMA with all original documentation. The R.M.A. number provided must be clearly marked on the packaging which should be sufficient to protect the part from any handling or in-transit damage.
  11. Credit, refunds or replacement will be issued upon final acceptance and receipt of the R.M.A.
  12. Any warranty provided is honored at the discretion of the shop issuing the Airworthiness Certificate for return / release to service.
  13. Acceptance of the Invoice constitutes acceptance of the terms and conditions stated herein as well as compliance with all applicable Export Administration Regulations. Export License acquisition is the responsibility of the purchaser and may be obtained from the Bureau of Industry and Security.

*Some components require a different calculation based on criteria such as DOM (Date of Manufacture)

TERMS & Conditions OF PURCHASE

  1. ITS reserves the right to immediately cancel a Purchase Order for any goods or services (the  “Parts”) purchased by ITS.
  2. All Parts and accompanying documentation are subject to ITS inspection and acceptance at its own discretion. If Product is rejected, ITS withholds the right to either i) return the Product, free of charge or ii) accept the Product with an agreed to price reduction or iii) request a replacement, free of charge.
  3. All Parts shall be accompanied with documentation showing full chain of custody (trace) back to the certificated source identified by the Purchase Order requirements as well as a signed statement of non-incident from the certificated source. The statement of non-incident shall include a similarly worded statement certifying the part was not obtained from any government or military source nor were they subject to extreme stress or heat (as in major engine failure, accident or fire), or immersed in saltwater. Product obtained from a Government, Military or Private source will not be accepted.
  4. All Parts shall be accompanied with a material certification (ATA-106) and a signed statement of non-incident from the seller.
  5. Parts represented in a Serviceable (Modified, Inspected, Tested, Repaired, Overhauled or Rebuilt) condition must be accompanied with an original Airworthiness Certificate, as specified by the ITS Purchase Order requirements, substantiating the material’s condition. A Report describing the maintenance activity in greater detail is required unless otherwise specified in the Purchase Order requirements.
  6.  Where an original Airworthiness Certificate is provided, the data used for maintenance and issuance of the Return / Release To Service shall not deviate from the current manufacturer’s Maintenance Manual or Instructions for Continued Airworthiness ( No DER, IEN, ORI etc.) without explicit approval provided in writing by the Purchaser.
  7. If the quantity ordered is less than the fully quantity indicated on the Airworthiness Certificate, a True Certified Copy shall be provided,
  8. Unless otherwise specified and agreed to in the ITS Purchase Order, Parts represented in a “Repaired” condition shall be warranted to ITS for 6 months from the date of the Airworthiness Certificate and part’s represented in an “Overhauled” condition shall be warranted to ITS for 1 year from the date of the Airworthiness Certificate.
  9. Parts will not be accepted, where inadequate documentation is provided to establish objective traceability back to the certificated source, as specified in the ITS Purchase Order.
  10. Where a part has been determined to be BER (Beyond Economical Repair) by a Certified Repair Station, from either the absence of repair methods or available repair methods more costly than the product’s current market value and/or agreed upon repair cap, ITS reserves the right to return to the supplier.
  11. As Removed parts will not be approved and accepted until the partsl have been sent to a certified repair station for proper inspection and evaluation.
  12. Inspection/evaluation of As Removed material:  Adequate time will be given by the supplier for ITS to fully evaluate the material to determine its acceptance.  ITS will do its best to have the material inspected and disposition provided within 30 days from the date of shipment.
  13. Where an RMA is requested for the return and credit of Product, it shall be provided within seven (7) business days or the product will be shipped back to the supplier without the benefit of having an RMA.
  14. Shelf-life sensitive parts must be identified and marked with a cure date and/or expiration date.
  15. Life Limited Parts (LLP) must have documentation showing back to birth (installation at Zero Cycles or New Condition) as well as the current life status (Times and Cycles) certified by the last certificated source.
  16. Engine parts are required to have trace back to an Engine Serial Number (ESN).
  17. Interchangeable or alternate parts are not accepted without explicit prior approval in writing by an ITS representative.
  18. Packaging of parts shall be appropriate to the material being shipped and adequately protected from any handling or in-transit damage.
  19. Any Purchase Order information or information related to the Purchase Order shall be confidential.
  20. Where necessary, suppliers shall flow down to their suppliers the requirements specified by the ITS Purchase Order.
  21. Acceptance of an ITS Purchase Order provides right of access by ITS, our customer and/or regulatory authorities to the applicable areas of all facilities, at any level of the supply chain, involved in the order and to all applicable records.
  22. The supplier shall notify ITS of any nonconformities affecting product supplied to ITS and notify ITS of any major changes to the supplier’s QMS which may affect product quality.
  23. A Quality Management System, appropriate for the size and scope of the organization, shall be implemented, which includes processes for the prevention of suspected unapproved parts and counterfeit parts as well as being aware of the supplier’s contribution to product / service conformity, product safety and the importance of ethical behavior.
  24. Records relating to product supplied to ITS shall be retained for a minimum of 2 years from the date of sale.  
  25. Acceptance of an ITS Purchase Order constitutes acceptance of the terms and conditions stated herein.

Revision F  08/03/2017